0
0
To maintain the appearance and longevity of your car, you use the car covers, right? But do you use the car covers properly, so that it won’t get damaged.
If it makes you think, then, my friend that’s the main reason your covers are getting torn frequently. It shields your car from from harsh sunlight, preventing scratches from debris, or keeping it free from dust and dirt.
If you don’t install it properly, this leads to scratches and tears in the cover, which eventually reduces protection. However, to cover your car perfectly, we’ll guide you through the step-by-step process. This will protect your car, extend the life of your car cover and save you a lot of money. So, why wait? Let’s read it!
Let The Process Begins
Come and Select The Cover
So, the first step is to find the cover that is right for you and your car. As these come in different sizes, fits and materials and cater for environmental conditions.
- The Perfect Fit – If you go for a small cover, it outstretches and leads to tears. Or if you choose a big cover, it does not stay in its place, which allows the wind to lift it and cause scratches or abrasions.
- Fabric Used – If your car spends most of its time directly into contact with nature, what you’ll need is car covers outdoor protection. The covers having coverage that has UV protection and is water-resistant. For example, to shield it from the sun and rain. But if your car is usually parked in a garage, a light cover that mainly keeps dust away should do the trick.
Time To Your Car Ready For Installation
So, the time has come to put the cover on, well, for that let’s get your car ready. If your car is dirty, dust and debris can get trapped under the cover and cause scratches. Here’s how to prep your car:
- Give Your Car a Good Wash – Start by giving your car a thorough wash to get rid of any dirt, dust, or debris. Be sure to focus on areas like the wheel wells, lower body panels, and the front and rear bumpers – these spots tend to collect the most grime.
- Wipe and Inspect Your Vehicle – Dry your car completely with a soft towel to avoid water spots or mildew. Then, check the surface for any missed debris like small stones or leaves – removing these will help prevent scratches when you put the cover on.
Now Begins The Main Process
Once your car and cover are ready, it’s time to put the cover on. Just be careful not to stretch, tear, or drag the cover across the paint.
- Unfold the Cover Carefully – Start by unfolding the cover and finding the front and back ends – there’s usually a tag or label to help you. Place the cover on your car, making sure the front part lines up with the front bumper.
- Start with the Mirror – Most car covers are designed to go over the side mirrors first. This helps keep the cover in place as you adjust it. Hook it over one mirror, then stretch it across to the other mirror.
- Pull the Cover Over the Front Bumper – Once the mirrors are secure, move to the front and gently pull the cover over the front bumper. Make sure it fits the car’s shape and smooth out any wrinkles or folds.
- Secure the Rear Bumper – Next, move to the back and pull the cover over the rear bumper. Make sure it fits well and isn’t overstretched. You want it to be snug, with no loose areas that might flap in the wind.
- Smooth Out the Cover – Once the cover is on, walk around the car to check the fit. Smooth out any wrinkles and make sure it’s snug against the car. Pay extra attention to the corners and edges, as they can catch the wind.
Let’s Secure The Cover
Suppose you are living in windy weather place, a loose cover can shift or even come off, risking scratches or exposure. Several car covers have built-in straps, buckles, or tie-downs to help keep them securely in place.
- Use Straps or Buckles – If your cover has straps or buckles, use them to secure it to your car. They’re usually at the bottom and can be fastened underneath to keep the cover from blowing away.
- Add Extra Security in Strong Winds – In very windy areas, consider using additional clips or bungee cords to keep the cover in place. Just make sure not to overtighten, as this could damage both the cover and your car’s paint.
Uncover The Car Securely
When it’s time to take the cover off, do it carefully to avoid dragging any dirt or debris across your car’s surface.
- Rear Bumper First – Start by unhooking the cover from the rear bumper and gently fold it towards the front. This way, you avoid dragging it across your car’s paint.
- Remove from the Mirrors – After folding the cover towards the front, unhook it from the mirrors. Be gentle to avoid stretching or tearing the cover.
- Roll the Cover – Instead of pulling it off, roll the cover as you go. This helps avoid dragging it across the paint and picking up debris that could scratch the surface.
Store the Cover Nicely
Properly storing your car cover is key to keeping it in good shape. After you remove it, make sure it’s clean and completely dry before folding it up.
- Clean the Cover if Needed – If your cover has dirt or debris on it, clean it before storing. A number of car covers can be washed with mild soap and water, but check the manufacturer’s care instructions first.
- Dry the Cover Completely – After cleaning, let the cover dry fully before folding it. Storing a damp cover can lead to mold, mildew, and bad odors.
- Fold and Store the Cover – Once it’s dry, fold the cover neatly and keep it in a cool, dry place. If it came with a storage bag, use it to protect the cover from dust and moisture.
Secure Till Next Usage
So, now you know that the car covers also need care and maintenance. Neglecting these points can harm the covers and you monetary. Ah, with money, you can get the car covers for sale, as there are many brands who have such offers. So, research well to get the perfect one in your budget. We’ll meet in some other blog, till then – Don’t Forget To Follow These Steps!
Average Rating